Advertisement

Commentary: Prepare your home for a fire

September 19, 2012|By Sam DiGiovanna

It's not just the health concerns and power outages associated with hot days. We are stepping right into our first high pressure system of the season and if you ask any fire service authority, all will agree this will be an extremely dangerous fire season.

If you haven't already, get your home prepared, especially if you live in the hillside communities. Here are some tips to think about:

*

Defensible space

Create a zone around your house that will slow the wildfire down and possibly direct it around your home. To do this, you must view your yard as a fuel source. Fire will only burn if fuel is present. Fuel can be your landscaping, woodpiles, decks, etc.

Advertisement

To create your defensible space, take the following steps within 30 feet of your home, 50 feet if you live in a heavily treed area or 100 feet if your home is on a hillside. In California, a minimum of 100 feet is required. Some areas may require more. Check with your local fire department.

•Introduce more native vegetation.

•Space trees at least 10 feet apart.

•Remove dead or dying trees and shrubs.

•Keep trees and shrubs pruned. Branches should be a minimum of 6 feet from the ground and shrubs under trees should be no more than 18 inches high.

•Mow your lawn regularly and dispose promptly of cuttings and debris.

•Maintain your irrigation system.

•Clear your roof, gutters and eaves of debris.

•Trim branches so they do not extend over the roof or near the chimney. Move firewood and storage tanks 50 feet away from home and clear areas at least 10 feet around them. Store flammable liquids properly.

•Do not connect wooden fencing directly to your home.

•Keep the grounds around your home free of pine needles.

*

Build or retrofit with non-flammable materials

If the wildfire gets to the house, another line of defense is the type of materials used on your home's exterior. Use the following guidelines to best protect your home:

•Use only non-combustible roofing materials.

•Box in the eaves, fascias, soffits and subfloors with fire resistant materials like treated wood, reducing the vent sizes.

•Apply 1/4-inch non-combustible screening to all vent or eave openings. Install spark arresters in chimneys.

•Enclose the undersides of decks with fire-resistant materials.

•Cover exterior walls with fire resistant materials like stucco, stone, or brick. Vinyl siding can melt and is not recommended.

Coastline Pilot Articles Coastline Pilot Articles
|
|
|